> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://label-wizard.crisp.help/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Printing on thermal and continuous-feed printers

### Pick roll or continuous stock

1. Design for a roll or **Continuous Feed** size that matches your physical labels (for example 4×6).
2. In Print labels, choose that same sheet/roll in the stock picker.
3. Set **Print resolution** to **203 DPI** unless your printer documentation recommends otherwise.

![Print modal showing Continuous Feed / roll selection and 203 DPI](https://leftfootsoftware.github.io/Help-Label-Wizard/v1/assets/en/ThermalPrintersStockPicker.png)

### Driver and printer setup

- Install the manufacturer’s driver or print utility.
- Set the printer’s label size to match the design.
- Disable options that resize the page to letter/A4 when you intend to print a single label.

### Browser printing to a thermal printer

Some setups print through the browser to the thermal printer; others use a print utility that watches a PDF. Follow your printer’s recommended path, but keep Label Wizard’s DPI and stock selection correct either way.

### Continuous feed vs sheets

Continuous designs are not multi-label office sheets. Do not pick an Avery sheet template when you are loading a thermal roll — the preview and layout will not match the printer.

### Related articles

- [Choosing your label stock](/en/article/choosing-label-stock-16q79he/)
- [Getting the best print quality](/en/article/print-quality-dpi-e58jna/)
- [Printing labels for your products](/en/article/printing-labels-a7krn2/)